Waterbed Mattresses for Wood Frame Waterbeds

Waterbed Pump for Emptying Waterbed Mattresses

Waterbed Pump is part of our Fast Shipping program

$89.99

Includes These Parts:

Heavy Duty Custom Hose
Waterbed Conditioner
Instruction booklet
Hose-Valve coupling
Faucet Adapters
Venturi Pump
Two o-rings
Extra Pump Impeller

Best Waterbed Pump for draining fiber and baffled mattresses
Replaceable impellers
Includes 6" reinforced hose for suction side
6 foot UL approved cord
Waterbed Pump is self priming and portable
Up to 360 gallons per hour
Fill kit and Conditioner included
12 month manufacturers warranty
Use waterbed pump for drains, basements, small pools too

Moving soon and need a good pump solution for draining your waterbed mattress? This waterbed pump will vacuum pack your mattress so the internal waveless system wont shift and get bunched up. Our waterbed pump will drain your waterbed mattress for easy moving. If you have more than one waterbed or a fiber filled bed, you need this waterbed pump.

We give you more! We include a drain kit, a bottle of conditioner and the special reinforced hose plus free shipping with each waterbed pump. Spare impeller.

Waterebed Pump Draining Instructions

IMPORTANT! - Unplug waterbed heater for safety
Remove cap and seal and put aside in safe place.
Remove any excess air from mattress - slide forearm or broom handle from the head of the bed toward the fill hole to move air pocket
Attach the heavy duty hose to the hose valve coupling, connect to the waterbed mattress and other end to the pump intake side. Be sure to include O-rings. Gently push the coupling deep into the mattress.
Attach garden hose to the discharge side of the pump, this hose goes to a tub, or a deep sink.
Plug in the pump. When it starts it should have a low whirring sound, not a high whiny one. If water is not pumping immediately unplug the motor and check hose connections for tightness, verify there is no air in the mattress.
As the pump removes the water, be sure the hose valve coupling at the mattress is pushed down in the mattress to maintain suction. Heavy phone books or other like items will help maintain proper position deep in the mattress.
Keep pumping the water out and continuing to maintain the hose valve coupling position low in the mattress so it can keep pumping.
Do not leave the pump or the area until finished. A dry pump can burn up.
When the mattress is part way empty, you can place pillows under it at the head to help the water run downhill towards the hose valve coupling.
Continue pumping until water flow stops or pump changes sound. The more water you get out, the easier your mattress will be to handle.
If you are satisfied you have got as much water out as you can, remove the hose valve coupling and quickly replace the mattress seal and screw the cap on.
If the mattress is to be stored for a period of time, pour in a large bottle of waterbed conditioner into the mattress before you cap and seal the mattress.
We recommend rolling up the mattress from the head to the foot and carefully sliding one end into a wardrobe box. Another wardrobe box can be worked over the top of the mattress. Work one box into the other and seal both ends and tape the boxes together in the middle. You can now safely move the mattress.
If you don't get enough water out, the fiber layers can easily slide out of position during moving and you may not be able to get them back into position when you fill the bed.